Facebook Embed
05 July 2007
Yay! The new motherboard, CPU, RAM and PSU are npw installed into my home fileserver. Booting up and running straight after the major upgrade without a hitch, very nice how seamless FreeBSD makes the transition but there again, I expected that to be problem free. Sitting on my desk is the old motherboard, an Intel OR840 with a Pentium 3 800MHz processor: A real oddity by todays standards as the CPU is a Slot-A module and the RAM is RamBus 800 modules. There is a spare slot for a second CPU which is only populated by the termination card... as are half the RAM slots. Tempting to try to find a second CPU and perhaps I will splurge and buy eComStation to run on this odd motherboard. At least now, I will be able to update FreeBSD on the fileserver without worrying about carefully reapplying patches to allow FreeBSD to work without problems on the OR840.
03 July 2007
Just when I was somewhat enthusiastic about swapping over my fileserver motherboard, I discover that my power supply is too ancient to support the new motherboard. Ho hum. So I have ordered a new PSU and it should arrive on the 5th. I was hoping to be able to do the swap during a day-off so theres minimal interruption.
28 June 2007
Server upgrade imminent. I have purchased a new motherboard, CPU and RAM to replace the aging Pentium 3 + OR840 combo with 128MB RamBus RAM I am currently using in the server. The new motherboard is a SuperMicro PDSGE and will have a Pentium 4 650 and 1Gb of RAM. I am probably not going to use the new motherboard's on-board gigabit ethernet adaptor because of concerns about Intel's AMT technologies.... Heck, I may just place the AMD PC/Net PCI adaptor for the outward facing interface (Yes, that is the same adaptor I 'cloned' when I wrote my AMD PC/Net PCI emulation for QEmu which is incidentially also used by Xen when performing machine emulation). I may just use the on-board gigabit NIC for a direct crossover link to the Mac for fast jumbo frames. Meanwhile, I just have to make sure that I have everything - Likely to need a new PSU to power the motherboard. Will probably need a few new case fan, good practice to replace them anyways for a machine which practically stays on 24 hours a day.
13 June 2007
Every now and again, I have to have a large sigh...
*** sighs ***
With the recent release from Perdue detailing a computer simulation of the 9/11 WTC attack, the fierce debates that it spawns as to the "It's an inside job" vs. "No it's not," camps and their arguments miss the point of the simulation.
I have looked at the short video clip and I would say that it seems plausible: I could imagine a aeroplane causing that kind of damage. It is also clear to me that the damage rendered to the core columns is inadequate to cause a complete structural failure of the whole building, especially considering that the aeroplanes hit quite high up on the building. There was relatively little load being supported by the core columns at that level.
Of course, the "Terrorists hate us" camp would trot out the argument that steel only needs to be heated up to half it's melting temperature in order to begin to warp and fail. Given that the buildings were hit some 400m above ground level, assuming that there was enough fuel burning to heat the core columns via radiation, and assuming that 100% of the radiation was absorbed with no radiative losses... for that heat to propagate down the core columns such that all the columns were heated sufficiently that a cascade "pancake" collapse would occur, hmm... after some scribblings on a back of a napkin.... assuming a rather light core column at an average cross section of .34 sq m per column... it would take as much energy as released in 18 million pounds of TNT to raise all the core columns to 800 degrees Celsius... Or expressed as a speed of a 747 aeroplane if translated into kinetic energy - about the same as if it was traveling at around 10,000 miles per hour.
Pretty fast, innit?
Oh well... People never let facts bother their perception of the world. Unfortunately, they let any idiot vote nowadays.
*** sighs ***
With the recent release from Perdue detailing a computer simulation of the 9/11 WTC attack, the fierce debates that it spawns as to the "It's an inside job" vs. "No it's not," camps and their arguments miss the point of the simulation.
I have looked at the short video clip and I would say that it seems plausible: I could imagine a aeroplane causing that kind of damage. It is also clear to me that the damage rendered to the core columns is inadequate to cause a complete structural failure of the whole building, especially considering that the aeroplanes hit quite high up on the building. There was relatively little load being supported by the core columns at that level.
Of course, the "Terrorists hate us" camp would trot out the argument that steel only needs to be heated up to half it's melting temperature in order to begin to warp and fail. Given that the buildings were hit some 400m above ground level, assuming that there was enough fuel burning to heat the core columns via radiation, and assuming that 100% of the radiation was absorbed with no radiative losses... for that heat to propagate down the core columns such that all the columns were heated sufficiently that a cascade "pancake" collapse would occur, hmm... after some scribblings on a back of a napkin.... assuming a rather light core column at an average cross section of .34 sq m per column... it would take as much energy as released in 18 million pounds of TNT to raise all the core columns to 800 degrees Celsius... Or expressed as a speed of a 747 aeroplane if translated into kinetic energy - about the same as if it was traveling at around 10,000 miles per hour.
Pretty fast, innit?
Oh well... People never let facts bother their perception of the world. Unfortunately, they let any idiot vote nowadays.
31 May 2007
This is amusing... Ok, perhaps ironic, also prophetic... But quite definitely amusing.
Apologies to all those people who have seen it in March but here is the link:
George Orwell's former house surrounded by 32 CCTV cameras, all within 200 yards.
Apologies to all those people who have seen it in March but here is the link:
George Orwell's former house surrounded by 32 CCTV cameras, all within 200 yards.
22 May 2007
Delayed posting, originally for Monday 16 April, 2007
So much has happened during th past week but due to the happenings, I have not been able to post any news.
Easter Sunday at around 3:30am, my mother in law suffered a severe heart attack. She passed away early on Tuesday at about 4:30am. These events were completly unexpected due to the full exam she had a month ago and of her mere hours before the heart attack. We held her funeral and burial on Friday. There was quite a good turnout.
So much has happened during th past week but due to the happenings, I have not been able to post any news.
Easter Sunday at around 3:30am, my mother in law suffered a severe heart attack. She passed away early on Tuesday at about 4:30am. These events were completly unexpected due to the full exam she had a month ago and of her mere hours before the heart attack. We held her funeral and burial on Friday. There was quite a good turnout.
18 April 2007
29 March 2007
Morons from Saturn... Sounds like a B film title but it is the reality of the total idiots at a certain car dealership in Cerritos. I would wager that the employees of their service department are completely unable to tell their ass from their elbows without the aid of a working diagnostic computer... Except that they are unable o READ or THINK in order to plug the wires in. As people would say in England... What a load of Plonkers.
Funny how the optimism of what airlines tell their customers know no bounds. Here I am writing this entry and its already 6 minutes past the ticketed boarding time and there is still no aeroplane at the gate, yet they have only just changed status from 'on time' to 'delayed 20 minutes'. This is dispite the fact that the aeroplane is still in the air with passengers on its way here.
Kind of like trains in the UK.
Kind of like trains in the UK.
08 March 2007
Stuck in rainy Seattle. Yes, it did rain for a while earlier. I listened to it hitting the roof and windows. I still hear a few spots now.
I am returning back to Los Angeles today. It was nice to work and chat with Bran but I do miss Katie... and the messed up cat Sweety.
Here is a random thought which just struck me: Freedom is having a wide range of choices available and not having to make a decision.
I am returning back to Los Angeles today. It was nice to work and chat with Bran but I do miss Katie... and the messed up cat Sweety.
Here is a random thought which just struck me: Freedom is having a wide range of choices available and not having to make a decision.
23 February 2007
It is somewhat facinating that Americans will debate the British origins of many English phrases without ever consulting an Englishman.
A case in point: The debate on the origin of the phase "Rule of Thumb" which people parrot as being a part of British Common Law permitting husbands to beat their wives, which is then used as an explanation as to why it is not written down. A few problems: English Common Law is written down as it utilises past precedent and that the earlist reference to "Rule of Thumb" as an defense for beating a wife in a case near the beginning of the 20th century. The best explanation is this: The phrase has its origins in the textile industry as a way to measure fabrics. Half the circumference of the thumb does approximate an inch. It was well established as a phrase when the English went to the New World. In the Americas, some pious preacher then invented the concept that it was ok to discpline an errant wife whereupon it entered into American folklore. That concept was then exported back to Britian at the turn of the 20th century through literature and by US servicemen who served in Europe.
Another thing which does irk me some is the ancient nursery rhyme which Americans know as "Ring around a Rosie". Here is the version I learnt as a child:
It is popular to attribute this rhyme as related to the Black Plague... However another interpretation which is not concidered much is the ancient pre-Christian practice of dancing around the maypole, which is an ancient fertility ritual.
Isn't history so much fun?
A case in point: The debate on the origin of the phase "Rule of Thumb" which people parrot as being a part of British Common Law permitting husbands to beat their wives, which is then used as an explanation as to why it is not written down. A few problems: English Common Law is written down as it utilises past precedent and that the earlist reference to "Rule of Thumb" as an defense for beating a wife in a case near the beginning of the 20th century. The best explanation is this: The phrase has its origins in the textile industry as a way to measure fabrics. Half the circumference of the thumb does approximate an inch. It was well established as a phrase when the English went to the New World. In the Americas, some pious preacher then invented the concept that it was ok to discpline an errant wife whereupon it entered into American folklore. That concept was then exported back to Britian at the turn of the 20th century through literature and by US servicemen who served in Europe.
Another thing which does irk me some is the ancient nursery rhyme which Americans know as "Ring around a Rosie". Here is the version I learnt as a child:
- Ring-a-ring o' roses,
A pocket full of posies,
ah-tishoo, ah-tishoo (like sneezing)
We all fall down
It is popular to attribute this rhyme as related to the Black Plague... However another interpretation which is not concidered much is the ancient pre-Christian practice of dancing around the maypole, which is an ancient fertility ritual.
Isn't history so much fun?
05 February 2007
I was browsing cnet's news and I noticed that they posted some photos of the Collosus rebuild project. In the blurb, they failed to mention that the British had built several more of them for redundancy and increase throughput... and of course each later one carried improvements from the previous. If you're ever near Milton Keynes, it is worth spending a day at Bletchley Park. There is a computer museum there which has many working old computers, including an IBM PC model 5150, similar to the first PC that I owned. The Sinclair ZX-81 doesn't count as that belonged to my dad.
30 January 2007
27 January 2007
23 January 2007
19 January 2007
15 January 2007
UPS delivery drivers here are complete and utter MORONS! Actually, thats insuling to the common moron. Look at the box: Three large symbols, first one means "this way up", the second one means "fragile", the third means "keep dry". Yet this delivery man throws the box from his cab onto the front door step - a clear 15ft that the box, which contains a replacement hard drive from Seagate, is airborne! That does not fit my definition of careful handling. And UPS has no easy way to lodge a complaint about mishandled packages on their web site - as if they hope that no one will complain. Wankers, the whole lot of them!
07 January 2007
Subscribe to:
Posts (Atom)